Isisiki esivundlile se-veneer sokhuni esiqondile sesisiki se-veneer sikamshini wokukhiqiza i-plywood

Veneer slicer is mainly for slicing solid wood, engineer wood and other composite board, working efficiency is high, and veneer thickness is uniform. It is widely adopt in decorative veneer of plywood, furniture, flooring, construction industry and so on.

INQUIRY

Incazelo

Horizontal veneer slicer wood vertical veneer slicer veneer slicer machine plywood production line

Horizontal veneer slicer wood vertical veneer slicer veneer slicer machine umugqa wokukhiqiza we-plywood,horizontal wood slicing 4*8 engineer wood block veneer slicer machine

1 Double V-chutes are used for both sides the machine, with high parallel; special polymer wear-resistant material coated on the surface.Machine runs in higher stability and with less friction.

2 Serve motor control system is used for timber feeding, guarantees the veneer thickness in a high precision, avoiding blade scratch on the timber.

3 Whole casted beam holds the log strongly, and hydraulic driven hooks clamp the log tightly and effectively. Vacuum disc system is used inside the log beam to help holding the big timber in order to avoid logs deforming or dropping down during cutting procedure

4 All switch button are gathered in a cabinet.Single person can operate the machine avoiding the dangerous caused by fault.

5 Special designed big size driving gear runs smoothly with a low noise when it runs high speed.
wood slicing vertical veneer slicer machine,veneer slicer machine plywood production line,veneer slicer machine,engineering wood block veneer gurjan veneer slicer,wood veneer slicer machine,woodworking machines veneer slicer.

SPECIFICATIONS FOR HORIZONTAL VENEER SLICER
imodeli	BB1131	BB1226	BB1142
Max cutting size	2600x700x680mm	2600x1300x950mm	4200x1300x950mm
Usayizi Blade	3500x200x24mm	3500x200x24mm	4500x2000x24mm
Veneer thickness	0.1-2.2mm	0.1-2.2mm	0.1-2.2mm
Isivinini sokusika	I-0-36pcs / iminithi	I-0-36pcs / iminithi	I-0-36pcs / iminithi
Wood clamping unit	10units	10 amayunithi	10units
Clamping methods	Hydraulic	Hydraulic	Hydraulic
Ingqikithi yesisindo	22Tons	24Tons	32Tons
Usayizi jikelele	8030x4530x2530mm	9530x5670x2470mm	9550x5950x2990mm

Photos in User Factory

Izingxenye zomshini
Double V-chutes are used for both sides the machine, with high parallel; special polymer wear-resistant material coated on the surface.Machine runs in higher stability and with less friction.

Double V-chutes

ibhande elihambayo

Servo motor

Izici main
Serve motor control system is used for timber feeding, guarantees the veneer thickness in a high precision, avoiding blade scratch on the timber